Circuit Sim Lab (電路模擬實驗室)
PCB calculators for impedance, crosstalk, skew, crystal load and inrush, via MCP
- Pricing
- Freemium
- Platforms
- Web, API
- Runs
- Remotely
- Version
- 1.0.0
- Listing updated
- 1 day ago
About Circuit Sim Lab (電路模擬實驗室)
Circuit Sim Lab (電路模擬實驗室) is a freemium MCP server for engineering simulation. It runs as a hosted remote server, so there is nothing to install locally.
Circuit Sim Lab exposes six numeric calculators for PCB and circuit design to AI assistants: trace impedance, near-end crosstalk, differential skew, crystal load capacitance, output-voltage tolerance and inrush current. The site is in Traditional Chinese, and the same calculators are available through a REST API.
Inputs are numbers only, with no netlists or files, and the service does not offer SPICE or 3D full-wave simulation. Each result carries a scope field quoting the tool page's statement of where the calculation applies, plus a note on what the API version omits; out-of-range values return an error naming the field rather than a quietly inaccurate figure. Impedance covers microstrip and stripline pairs using a 2D field solution.
Listing tools needs no key, but running a calculator needs a Pro API key sent as a bearer token. Usage is capped at 2,000 calls a day. The site says it records only daily call counts and key hashes, not call contents.
Install
Run in a terminal
claude mcp add --transport http circuit-sim https://circuit-sim.enscon.ai/mcpAdd to Settings → Connectors → Add custom connector
https://circuit-sim.enscon.ai/mcpAdd to ~/.cursor/mcp.json
{
"mcpServers": {
"circuit-sim": {
"url": "https://circuit-sim.enscon.ai/mcp"
}
}
}Add to .vscode/mcp.json
{
"servers": {
"circuit-sim": {
"type": "http",
"url": "https://circuit-sim.enscon.ai/mcp"
}
}
}Add to ~/.codeium/windsurf/mcp_config.json
{
"mcpServers": {
"circuit-sim": {
"serverUrl": "https://circuit-sim.enscon.ai/mcp"
}
}
}Add to your client's MCP settings (most use this shape)
{
"mcpServers": {
"circuit-sim": {
"type": "http",
"url": "https://circuit-sim.enscon.ai/mcp"
}
}
}Tools this server provides (6)
Taken from the project documentation; the running server may differ.
- impedance
- Differential or single-ended trace impedance.
- crosstalk
- Near-end crosstalk coefficient and related values.
- diff_skew
- Converts length difference to picoseconds against interface limits.
- xtal_load_cap
- Crystal load capacitance, ppm offset and drive power.
- output_voltage_tolerance
- Feedback-divider output tolerance.
- inrush_current
- Inrush current, energy and I2t.
What it does
- Impedance
- Differential or single-ended impedance for microstrip and stripline, including copper thickness.
- Crosstalk
- Near-end coefficient, saturation ratio and far-end coefficient.
- Differential skew
- Converts length mismatch to picoseconds against USB3, PCIe, DP and HDMI limits.
- Crystal load
- Load capacitance, ppm shift, gain margin and drive power.
- Voltage tolerance
- Worst-case, RSS and optional reproducible Monte Carlo for a feedback divider.
- Inrush current
- Current, energy and I2t for load switches or direct capacitance.
Good for
- Check differential pair impedance for a given stackup
- Verify a USB3 or PCIe skew budget
- Select crystal load capacitors
- Estimate output voltage spread over resistor tolerance
- Size inrush current for a load switch
Pricing
Freemium
Web calculators free; API/MCP needs Pro (NT$1,990 a year)
Prices change. Check circuit-sim.enscon.ai before you buy.
Circuit Sim Lab (電路模擬實驗室) FAQ
Is a key required?
Listing tools is open; calling a calculator needs an API key as a bearer token.
What does the API plan cost?
The API and MCP belong to the Pro plan, which the site lists at NT$1,990 a year.
Are the calculators free on the website?
Yes, the site says its 24 calculators are free to use without signing in.
What is the daily limit?
2,000 calls a day on a subscription; parameter errors do not count.
Is Circuit Sim Lab (電路模擬實驗室) free?
Circuit Sim Lab (電路模擬實驗室) has a free plan, with paid plans for more usage or features.
How do I add Circuit Sim Lab (電路模擬實驗室) to Claude Code?
Run this command in your terminal: claude mcp add --transport http circuit-sim https://circuit-sim.enscon.ai/mcp
What are the best alternatives to Circuit Sim Lab (電路模擬實驗室)?
The closest alternatives to Circuit Sim Lab (電路模擬實驗室) are REA, Codebase Memory, GitHub, Serena MCP: the IDE for your agent and XERJ.
Alternatives to Circuit Sim Lab (電路模擬實驗室)

REA
MCP serverCLI and MCP server that lets coding agents reverse engineer apps and binaries
Runs locally- Open source
- 464K GitHub stars
- Developer tools

Codebase Memory
MCP serverLocal MCP server that builds a code knowledge graph for AI coding agents
Runs locally- Open source
- 48.7K GitHub stars
- Knowledge and memory

GitHub
MCP serverOfficial MCP server connecting AI assistants to GitHub repos, issues and workflows
Not checked yet- Remote
- Open source
- 34.5K GitHub stars
- Developer tools

Serena MCP: the IDE for your agent
MCP serverMCP toolkit giving coding agents symbol-level code retrieval and editing
Runs locally- Open source
- 31.5K GitHub stars
- Developer tools

XERJ
MCP serverLocal search engine for AI agents with cited answers over your code and docs
Runs locally- Open source
- 19.2K GitHub stars
- Knowledge and memory

Ouroboros
MCP serverSpec-first layer that pins requirements and verifies results of AI coding agent work
Runs locally- Open source
- 6.4K GitHub stars
- Developer tools