Skip to content
MCP server

TSUNAGI///Matrix — MAPPING

Tune BMW E46 M3 engine maps and decode SMG II calibrations from logs and ECU files

Pricing
Open source
Platforms
CLI, self-hosted, macOS
Runs
Locally or Remotely
Version
0.4.0
Listing updated
2 days ago

About TSUNAGI///Matrix — MAPPING

TSUNAGI///Matrix — MAPPING is an open-source MCP server for automotive tuning. It can run locally on your machine or as a hosted remote server.

Everything runs on your own machine, with no car and no cable: you give it files, it gives back calculations. Feed it an MSS54HP engine ECU image plus a Testo drive log and it returns the volumetric efficiency (VE) correction the drive supports, which cells change, which need more driving and how to drive them, and optionally a tuned file with checksums fixed. The README says that file matches what the TUNER app's download produces.

Other commands inspect a bin file's contents, checksums and patches, explain why log samples were discarded (cold engine, transients, full load, overrun), and sketch an experimental exhaust-temperature (rf_korr) correction table. For SMG II gearbox images it identifies the image type, ZB number and CRC state, decodes shift speeds, gear ratios and clutch and launch settings, and compares two calibrations.

This server is the mapping category of TSUNAGI///Matrix, which the README says computes nothing itself and carries each tool's code to the assistant. It ships practice files, and the MS4X definition file for SMG decoding is not included.

Install

Run in a terminal

claude mcp add --transport http matrix-tsunagi-mapping https://matrix-mcp.tsunagi.app/mcp/mapping

Add to Settings → Connectors → Add custom connector

https://matrix-mcp.tsunagi.app/mcp/mapping
Install in CursorOpens Cursor, which asks you to confirm. Or add it by hand:

Add to ~/.cursor/mcp.json

{
  "mcpServers": {
    "matrix-tsunagi-mapping": {
      "url": "https://matrix-mcp.tsunagi.app/mcp/mapping"
    }
  }
}
Install in VS CodeOpens VS Code, which asks you to confirm. Or add it by hand:

Add to .vscode/mcp.json

{
  "servers": {
    "matrix-tsunagi-mapping": {
      "type": "http",
      "url": "https://matrix-mcp.tsunagi.app/mcp/mapping"
    }
  }
}

Add to ~/.codeium/windsurf/mcp_config.json

{
  "mcpServers": {
    "matrix-tsunagi-mapping": {
      "serverUrl": "https://matrix-mcp.tsunagi.app/mcp/mapping"
    }
  }
}

Add to your client's MCP settings (most use this shape)

{
  "mcpServers": {
    "matrix-tsunagi-mapping": {
      "type": "http",
      "url": "https://matrix-mcp.tsunagi.app/mcp/mapping"
    }
  }
}

What it does

VE map correction
Computes cell-by-cell corrections from an ECU image and a drive log.
Log rejection reasons
Explains why samples were dropped and what to change next drive.
SMG II decoding
Reads shift speeds, gear ratios and clutch settings from a calibration.
Calibration comparison
Shows what changed between two SMG II files.
Offline practice mode
Sample files let you try it without your own data.

Good for

  • Correct a CSL-converted MSS54HP VE map from a drive log
  • Check an ECU bin's checksums and patches
  • Compare two gearbox calibrations
  • Work out why most of a log was excluded

Pricing

Open source

Site says the tools are published as open source, free

Prices change. Check m3.tsunagi.app before you buy.

TSUNAGI///Matrix — MAPPING FAQ

Does it need a connected car?

No. It works on files on your own machine.

How do I try it?

Run `npx matrix-tsunagi mapping ve --sample` to use the shipped practice files.

Which car is it for?

The BMW E46 M3 with the S54 engine, MSS54HP DME and SMG II gearbox.

Is the SMG definition file included?

No. You supply the MS4X Dev Team's definition file yourself.

Is TSUNAGI///Matrix — MAPPING free?

Yes. TSUNAGI///Matrix — MAPPING is open source, so you can use and self-host it for free.

How do I add TSUNAGI///Matrix — MAPPING to Claude Code?

Run this command in your terminal: claude mcp add --transport http matrix-tsunagi-mapping https://matrix-mcp.tsunagi.app/mcp/mapping

Alternatives to TSUNAGI///Matrix — MAPPING

  1. Read and verify BMW E46 M3 ECU backups and cluster EEPROM dumps, read-only

    Runs locally
    • 4 tools
    • Open source
    • Automotive tuning