PT Chart
Refrigerant PT lookups, superheat and subcooling calculators and quick diagnosis for HVAC
- Pricing
- Free
- Platforms
- API, Web
- Runs
- Remotely
- Version
- 1.0.0
- Listing updated
- 1 day ago
About PT Chart
PT Chart is a free MCP server for home services. It runs as a hosted remote server, so there is nothing to install locally.
The numbers come from published refrigerant properties rather than scraped chart tables. Seven refrigerants use CoolProp 8.0.0 lookup tables from minus 60 to 150 F on a 1 F grid with linear interpolation, while R-452B uses a Honeywell-anchored smooth fit after the CoolProp table failed an anchor check. Interpolation was checked against direct CoolProp calls with a worst error of 0.08 psi.
Covered refrigerants are R-410A, R-454B, R-32, R-22, R-134a, R-404A, R-407C and R-452B. The tool converts temperature to bubble and dew pressure, pressure back to temperature, and computes superheat, subcooling and condenser approach from gauge and thermometer readings, then says what to check first. Notes cover glide on zeotropic blends and that R-454B subcooling can take up to 60 minutes to settle below about 65 F ambient.
The site stresses it is a reference, not a charging procedure: the equipment nameplate always governs.
Install
Run in a terminal
claude mcp add --transport http pt-chart-mcp https://pt-chart-mcp-production.up.railway.app/mcpAdd to Settings → Connectors → Add custom connector
https://pt-chart-mcp-production.up.railway.app/mcpAdd to ~/.cursor/mcp.json
{
"mcpServers": {
"pt-chart-mcp": {
"url": "https://pt-chart-mcp-production.up.railway.app/mcp"
}
}
}Add to .vscode/mcp.json
{
"servers": {
"pt-chart-mcp": {
"type": "http",
"url": "https://pt-chart-mcp-production.up.railway.app/mcp"
}
}
}Add to ~/.codeium/windsurf/mcp_config.json
{
"mcpServers": {
"pt-chart-mcp": {
"serverUrl": "https://pt-chart-mcp-production.up.railway.app/mcp"
}
}
}Add to your client's MCP settings (most use this shape)
{
"mcpServers": {
"pt-chart-mcp": {
"type": "http",
"url": "https://pt-chart-mcp-production.up.railway.app/mcp"
}
}
}What it does
- Eight refrigerants
- R-410A, R-454B, R-32, R-22, R-134a, R-404A, R-407C and R-452B.
- PT and reverse lookup
- Pressure to temperature and back, with bubble and dew values.
- Superheat and subcooling
- Calculators using dew and bubble points correctly.
- Quick diagnose
- Takes gauge readings and suggests what to check first.
- Sourced data
- CoolProp tables with documented anchors and validation.
- Fixed-orifice estimate
- Approximate target superheat formula, with manufacturer charts overriding.
Good for
- Look up saturation pressure on a service call
- Check superheat on a TXV system
- Compare subcooling to a nameplate target
- Choose dew versus bubble for a blend
Pricing
Free
Free
Prices change. Check coolbooked.com before you buy.
PT Chart FAQ
Which refrigerants are covered?
Eight, from R-410A to R-452B.
Where does the data come from?
CoolProp-based tables, with R-452B anchored to Honeywell figures.
Is it a charging guide?
No, the nameplate always governs.
Is it free?
The site describes the tool as free.
Is PT Chart free?
Yes. PT Chart is free to use.
How do I add PT Chart to Claude Code?
Run this command in your terminal: claude mcp add --transport http pt-chart-mcp https://pt-chart-mcp-production.up.railway.app/mcp
What are the best alternatives to PT Chart?
The closest alternatives to PT Chart are MadMax Trade Supply parts, Host Tools, HALPII, Petrolytx: decline curves and well economics and zumen-gate.
Alternatives to PT Chart

MadMax Trade Supply parts
MCP serverSearch replacement filters, alarms and batteries, check fit and build a cart link
- 7 tools
- Remote
- Free
- E-commerce
Host Tools
MCP serverAirbnb, VRBO and Booking.com messages, reservations, reviews and pricing via API
- Remote
- Free trial
- Home services

HALPII
MCP serverFind tradespeople across Latin America by trade and city from an AI assistant
- 4 tools
- Remote
- Free
- Home services

Run decline curve fits, forecasts and well economics on your own Petrolytx wells
Not checked yet- Remote
- Freemium
- Analytics and data

zumen-gate
MCP serverRead, search, render, edit and convert CAD drawings such as JWW, DWG, DXF and SXF
Runs locally- 8 tools
- Freemium
- Engineering simulation

GPU CFD and conjugate heat transfer for cold plates, heat sinks and battery packs
- 86 tools
- Remote
- Contact sales
- Engineering simulation