Joinerycalc
Exact through-dovetail layouts for agents: widths, positions, angles and router templates
- Pricing
- Free
- Platforms
- Web, API
- Runs
- Remotely
- Version
- 1.0.0
- Listing updated
- 2 days ago
About Joinerycalc
Joinerycalc is a free MCP server for manufacturing. It runs as a hosted remote server, so there is nothing to install locally.
The calculator measures everything on the outside face of the pin board, where pins are narrowest and tails widest: an edge pin, tail, pin and so on, ending in an edge pin. Positions add up to the board width to the hundredth, and each sloped side shifts by thickness times the tangent of the angle.
Angles can be typed as a slope such as 1:8 (7.13 degrees per side) or as a router-bit angle and are shown in four conventions. Hand-cut mode takes the pin width and computes tails; router mode takes tail width, spaces pins evenly and sizes the template opening for the bushing. A single read-only MCP tool, dovetail_layout, needs no key or account, and the same calculation is available as a JSON API with optional SVG drawings.
Install
Run in a terminal
claude mcp add --transport http dovetail 'https://joinerycalc.com/mcp?via=registry'Add to Settings → Connectors → Add custom connector
https://joinerycalc.com/mcp?via=registryAdd to ~/.cursor/mcp.json
{
"mcpServers": {
"dovetail": {
"url": "https://joinerycalc.com/mcp?via=registry"
}
}
}Add to .vscode/mcp.json
{
"servers": {
"dovetail": {
"type": "http",
"url": "https://joinerycalc.com/mcp?via=registry"
}
}
}Add to ~/.codeium/windsurf/mcp_config.json
{
"mcpServers": {
"dovetail": {
"serverUrl": "https://joinerycalc.com/mcp?via=registry"
}
}
}Add to your client's MCP settings (most use this shape)
{
"mcpServers": {
"dovetail": {
"type": "http",
"url": "https://joinerycalc.com/mcp?via=registry"
}
}
}Tools this server provides (1)
Taken from the project documentation; the running server may differ.
- dovetail_layout
- Computes a through-dovetail layout with widths, positions, angles and router template.
What it does
- Exact widths
- Tail and pin widths on both faces.
- Angle conversion
- Slope, per-side and included angles.
- Router mode
- Tail width, even pin spacing and template opening.
- Cut sheet
- A bench sheet for marking out.
- JSON API
- Same layout at /api/v1/dovetail with optional SVG.
Good for
- Lay out three tails on a 140 mm board
- Convert a 1:6 slope to a router bit angle
- Size a router template for a bushing
Pricing
Free
Prices change. Check joinerycalc.com before you buy.
Joinerycalc FAQ
Do I need a key?
No key or account.
How many tools?
One read-only tool, dovetail_layout.
Does it support both methods?
Yes, hand-cut and router.
Is there an API?
Yes, with a schema at /openapi.json.
Is Joinerycalc free?
Yes. Joinerycalc is free to use.
How do I add Joinerycalc to Claude Code?
Run this command in your terminal: claude mcp add --transport http dovetail 'https://joinerycalc.com/mcp?via=registry'
What are the best alternatives to Joinerycalc?
The closest alternatives to Joinerycalc are Cutlab CNC, ProofPass, 轻排生产排产(MRP-PMC), The Cable Code and Formada3D 3D Printing.
Alternatives to Joinerycalc

Cutlab CNC
MCP serverQuote estimates and quote requests for a CNC cutting workshop in Tallinn
- 3 tools
- Remote
- Paid
- Manufacturing
ProofPass
MCP serverCurrent safety data sheets, EU product-document deadlines and duties, plus your account
- 31 tools
- Remote
- Freemium
- Legal and government

轻排生产排产(MRP-PMC)
MCP serverDrive the local MRP-PMC factory scheduler from AI for scheduling and material checks
Runs locally- Freemium
- Manufacturing
The Cable Code
MCP serverDecode cable designations across 71 coding systems and run cable design and sizing checks
- 25 tools
- Remote
- Freemium
- Engineering simulation

Formada3D 3D Printing
MCP serverQuote STL, 3MF and OBJ files for Melbourne 3D printing and browse printed products
- 34 tools
- Remote
- Paid
- Design and media

OTDeck
MCP serverLet AI agents read MQTT, Modbus, OPC UA and BACnet, with your approval for every write
Runs locally- 17 tools
- Freemium
- Developer tools