Skip to content
MCP server

Emission Factors

Keyless US grid carbon intensity and electricity rates by ZIP code

Install
Pricing
Free
Platforms
API, CLI
Runs
Remotely
Version
1.8.0
Listing updated
2 days ago

About Emission Factors

Emission Factors is a free MCP server for energy and smart home. It runs as a hosted remote server, so there is nothing to install locally.

Emission Factors wraps several US government energy datasets into one ZIP-keyed server: EPA eGRID, EIA-861 and EIA-930, EPA Clean Air Markets and OpenEI utility rates. The README says it covers more than 33,700 ZIP codes and needs no key or signup, with a limit of 2,000 requests an hour per IP.

For carbon accounting, calculate_emissions turns a ZIP and a kWh total into Scope 2 CO2e using both GHG Protocol methods: the location-based eGRID subregion rate and a market-based figure from the Green-e residual mix. Other tools return a subregion's generation mix and pollutants, a batch of up to 100 ZIPs, hourly carbon intensity from EIA-930 fuel-mix data, plant-level CAMD emissions for fossil units above 25 MW, and the actual utility tariff rather than a state average.

Its hourly figures are meant for timing and load shifting, not inventory reporting, and they lag by up to about a day. A remote server is hosted, and a local stdio build is available for clients that cannot use remote servers.

Install

Run in a terminal

claude mcp add --transport http emission-factors https://emission-factors.com/mcp

Add to Settings → Connectors → Add custom connector

https://emission-factors.com/mcp
Install in CursorOpens Cursor, which asks you to confirm. Or add it by hand:

Add to ~/.cursor/mcp.json

{
  "mcpServers": {
    "emission-factors": {
      "url": "https://emission-factors.com/mcp"
    }
  }
}
Install in VS CodeOpens VS Code, which asks you to confirm. Or add it by hand:

Add to .vscode/mcp.json

{
  "servers": {
    "emission-factors": {
      "type": "http",
      "url": "https://emission-factors.com/mcp"
    }
  }
}

Add to ~/.codeium/windsurf/mcp_config.json

{
  "mcpServers": {
    "emission-factors": {
      "serverUrl": "https://emission-factors.com/mcp"
    }
  }
}

Add to your client's MCP settings (most use this shape)

{
  "mcpServers": {
    "emission-factors": {
      "type": "http",
      "url": "https://emission-factors.com/mcp"
    }
  }
}

Tools this server provides (7)

Taken from the project documentation; the running server may differ.

lookup_emission_factor
eGRID emission factors and generation mix for a US ZIP code
lookup_by_coordinates
Emission factors from latitude and longitude
lookup_batch
Emission factors for up to 100 ZIP codes
calculate_emissions
Scope 2 CO2e from ZIP and kWh by both methods
hourly_intensity
Hourly grid carbon intensity for a ZIP
plant_emissions
EPA CAMD emissions for a plant or state
utility_tariff
Utility-specific electricity rate for a ZIP or utility

What it does

Scope 2 calculator
Computes location-based and market-based CO2e from ZIP and kWh.
ZIP lookups
Emission factors, generation mix and carbon-free share by ZIP.
Batch lookup
Up to 100 ZIP codes in a single call.
Hourly intensity
Hourly grid carbon from EIA-930 fuel-mix data.
Plant emissions
EPA CAMD data for fossil units over 25 MW.
Utility tariffs
Actual utility rates, fixed charge and time-of-use flag.

Good for

  • Estimate a facility's Scope 2 footprint from its ZIP and annual kWh
  • Compare candidate data center sites on carbon and power cost
  • Find the cleanest hours to run a batch job
  • Enrich a list of store ZIPs with emission factors
  • Look up the dirtiest power plants in a state

Pricing

Free

Free, no key; 2,000 requests per hour per IP

Prices change. Check emission-factors.com before you buy.

Emission Factors FAQ

Do I need an API key?

No. It is keyless, with a limit of 2,000 requests an hour per IP.

Which methods does Scope 2 use?

Both GHG Protocol methods: location-based eGRID and market-based Green-e residual mix.

Is the hourly data real-time?

No. It lags up to about a day and is meant for timing analysis, not inventory reporting.

Does it work in Claude Desktop?

Use the connector link or the local stdio build, since the config file only starts local servers.

Is Emission Factors free?

Yes. Emission Factors is free to use.

How do I add Emission Factors to Claude Code?

Run this command in your terminal: claude mcp add --transport http emission-factors https://emission-factors.com/mcp

What are the best alternatives to Emission Factors?

The closest alternatives to Emission Factors are Agent-Native Analytics, Google Ads + Meta Ads + SEO/GEO MCP, Tapetide - Indian Stock Market MCP, World Monitor and CompanyData.

Alternatives to Emission Factors

  1. Open-source analytics app where an AI agent builds charts and dashboards from your data

    • Remote
    • Open source
    • 7.7K GitHub stars
    • Analytics and data
  2. Hosted MCP connector for managing Google Ads, Meta Ads, GA4 and Search Console from chat

    • 8 tools
    • Remote
    • Freemium
    • 8.1K GitHub stars
    • Marketing and SEO
  3. Indian NSE and BSE stock market data for AI assistants through 48 MCP tools

    • 17 tools
    • Remote
    • Freemium
    • 150 GitHub stars
    • Finance and payments
  4. World Monitor

    MCP server

    Live geopolitical intelligence dashboard with an API and MCP server for agents

    • Remote
    • Freemium
    • Analytics and data
  5. CompanyData

    MCP server

    Search and enrich company records from official registers via the CompanyData API

    • 3 tools
    • Remote
    • Paid
    • 3 GitHub stars
    • Analytics and data
  6. ChartAnt

    MCP server

    Remote MCP server returning charts, maps and dashboards as hosted PNG links

    • 51 tools
    • Remote
    • Freemium
    • Design and media