DAQiFi
Open-source MCP server that lets agents configure and read DAQiFi Nyquist DAQ hardware
- Pricing
- Open source
- Platforms
- CLI, Windows, macOS
- Runs
- Locally
- Version
- 1.10.0
- Listing updated
- 2 days ago
About DAQiFi
DAQiFi is an open-source MCP server for engineering simulation. It runs locally on your machine and is started by your AI client.
A bench session starts with the agent calling discover_devices, connecting by device ID, enabling the channels you name and setting a sample rate, then pulling a bounded block of rows back into the conversation. The site's example asks for two seconds off channels 0 to 3 and gets a note that one channel carries a 60 Hz component. Several devices can be open at once.
Beyond live reads, the server drives outputs and handles on-device logging. It sets digital lines, runs PWM from 6 Hz to 50 kHz at 1 to 100 percent duty, and on Nyquist 3 drives DAC outputs with range checks before sending. SD logging runs at full rate on the device, and files can be listed, downloaded as parsed CSV or deleted. A request above the rate ceiling for the enabled channel count is rejected, not silently lowered.
The server is a .NET tool published on NuGet, speaks MCP over stdio and is a thin layer over the Daqifi.Core library. It is MIT licensed, and a --read-only flag blocks destructive actions such as deleting card files.
Install
Run in a terminal
claude mcp add daqifi-mcp -- dnx Daqifi.Mcp --yesAdd to claude_desktop_config.json
{
"mcpServers": {
"daqifi-mcp": {
"command": "dnx",
"args": [
"Daqifi.Mcp",
"--yes"
]
}
}
}Add to ~/.cursor/mcp.json
{
"mcpServers": {
"daqifi-mcp": {
"command": "dnx",
"args": [
"Daqifi.Mcp",
"--yes"
]
}
}
}Add to .vscode/mcp.json
{
"servers": {
"daqifi-mcp": {
"type": "stdio",
"command": "dnx",
"args": [
"Daqifi.Mcp",
"--yes"
]
}
}
}Add to ~/.codeium/windsurf/mcp_config.json
{
"mcpServers": {
"daqifi-mcp": {
"command": "dnx",
"args": [
"Daqifi.Mcp",
"--yes"
]
}
}
}Add to your client's MCP settings (most use this shape)
{
"mcpServers": {
"daqifi-mcp": {
"command": "dnx",
"args": [
"Daqifi.Mcp",
"--yes"
]
}
}
}Tools this server provides (27)
Taken from the project documentation; the running server may differ.
- get_server_info
- Server version and whether a newer release exists.
- get_hardware_info
- Published board specifications.
- discover_devices
- Find devices on USB/serial and WiFi.
- connect_device
- Connect to a discovered device.
- list_connected_devices
- List connected devices.
- disconnect_device
- Disconnect and release a device.
- get_device_status
- Connection, streaming and logging state.
- list_channels
- All channels with type, direction and range.
- configure_analog_channels
- Enable exactly the given analog channels.
- configure_digital_channels
- Enable exactly the given digital channels.
- set_digital_direction
- Set a digital channel to input or output.
- set_digital_output
- Drive a digital channel high or low.
- set_pwm_output
- Start PWM on a capable channel.
- disable_pwm
- Stop PWM on a channel.
- list_analog_outputs
- List DAC channels and their voltage ranges.
- set_analog_output
- Drive a DAC channel to a voltage (Nyquist 3 only).
- latch_analog_outputs
- Apply staged DAC voltages together.
- read_analog_output
- Read what a DAC channel is holding.
- set_sample_rate
- Set the sample rate in Hz.
- read_channel_values
- Latest value on every enabled channel.
- capture_samples
- A block of live samples as rows.
- start_sd_logging
- Start on-device SD logging.
- stop_sd_logging
- Stop SD logging.
- list_sd_files
- List log files on the SD card.
- get_sd_storage
- Free, used and total SD space.
- download_sd_file
- Fetch a log file and parse it to CSV.
- delete_sd_file
- Delete a file from the SD card.
What it does
- Device discovery
- Finds Nyquist units over USB/serial and WiFi and connects to them by ID.
- Channel and rate setup
- Enables exactly the named analog and digital channels and sets the sample rate in Hz.
- Live capture
- Returns the latest channel values or a block of samples, bounded by duration and row count.
- SD card logging
- Starts and stops on-device logging, reports free space and downloads logs parsed to CSV.
- Output control
- Drives digital lines, PWM and, on Nyquist 3, DAC voltages with range checks and latched updates.
- Read-only mode
- A --read-only flag blocks destructive tools such as deleting SD files.
Good for
- Capture a short burst from several channels and check for noise
- Spot-check a supply rail during hardware bring-up
- Run the same described test repeatedly on one or more Nyquist units
- Log data unattended to the SD card and fetch it later
- Set PWM or DAC outputs from a conversation
Pricing
Open source
MIT licence; requires DAQiFi Nyquist hardware
Prices change. Check daqifi.com before you buy.
DAQiFi FAQ
How does it connect to the hardware?
Over USB/serial or WiFi, through the DAQiFi Nyquist device discovery tool. The server itself runs locally over stdio.
What licence and runtime does it use?
MIT licence, built on .NET and distributed as the Daqifi.Mcp NuGet package.
Does SD logging work over WiFi?
The README says start_sd_logging requires a USB or serial connection.
Which clients work with it?
Claude Desktop, Claude Code, Cursor and Codex are named, along with any MCP client that can launch a stdio server.
Is DAQiFi free?
Yes. DAQiFi is open source, so you can use and self-host it for free.
How do I add DAQiFi to Claude Code?
Run this command in your terminal: claude mcp add daqifi-mcp -- dnx Daqifi.Mcp --yes
What are the best alternatives to DAQiFi?
The closest alternatives to DAQiFi are REA, Codebase Memory, GitHub, Serena MCP: the IDE for your agent and XERJ.
Alternatives to DAQiFi

REA
MCP serverCLI and MCP server that lets coding agents reverse engineer apps and binaries
Runs locally- Open source
- 464K GitHub stars
- Developer tools

Codebase Memory
MCP serverLocal MCP server that builds a code knowledge graph for AI coding agents
Runs locally- Open source
- 48.7K GitHub stars
- Knowledge and memory

GitHub
MCP serverOfficial MCP server connecting AI assistants to GitHub repos, issues and workflows
Not checked yet- Remote
- Open source
- 34.5K GitHub stars
- Developer tools

Serena MCP: the IDE for your agent
MCP serverMCP toolkit giving coding agents symbol-level code retrieval and editing
Runs locally- Open source
- 31.5K GitHub stars
- Developer tools

XERJ
MCP serverLocal search engine for AI agents with cited answers over your code and docs
Runs locally- Open source
- 19.2K GitHub stars
- Knowledge and memory

Ouroboros
MCP serverSpec-first layer that pins requirements and verifies results of AI coding agent work
Runs locally- Open source
- 6.4K GitHub stars
- Developer tools