Skip to content
MCP server

CarMaker

Let an agent run IPG CarMaker tests and parameter sweeps and read the results

Runs locallyStatus and history
Install
Pricing
Open source
Platforms
Windows, CLI, self-hosted
Runs
Locally
Version
0.2.1
Listing updated
today

Similar MCP servers

About CarMaker

CarMaker is an open-source MCP server for engineering simulation. It runs locally on your machine and is started by your AI client.

This community server lets an agent drive IPG CarMaker on your own computer. It can start a session, run test runs and background parameter studies one after another, read and plot results, change vehicle, driver and Simulink controller parameters, and undo what it changed. The README demo has an agent sweep the driver's lateral acceleration limits on a Formula Student skid pad over 68 runs.

It works in two modes. A MATLAB-connected session suits vehicles with a Simulink controller and needs MATLAB, your model and the CarMaker GUI. A standalone run uses CarMaker's built-in controllers and needs only CarMaker. A guide tool teaches the agent how IPGDriver's limits and g-g exponents affect lap time.

The project is alpha, tested on CarMaker 14.1.1, MATLAB R2024b and Windows 11, and is unofficial. You need your own licences. Writes are confined to the project folder named in CM_PROJECT. Linux, TruckMaker, HIL, Test Manager and road or traffic building are not covered.

Install

Run in a terminal

claude mcp add carmaker-mcp --env CM_PROJECT='<CM_PROJECT>' -- uvx carmaker-mcp

Add to claude_desktop_config.json

{
  "mcpServers": {
    "carmaker-mcp": {
      "command": "uvx",
      "args": [
        "carmaker-mcp"
      ],
      "env": {
        "CM_PROJECT": "<CM_PROJECT>"
      }
    }
  }
}

Add to ~/.cursor/mcp.json

{
  "mcpServers": {
    "carmaker-mcp": {
      "command": "uvx",
      "args": [
        "carmaker-mcp"
      ],
      "env": {
        "CM_PROJECT": "<CM_PROJECT>"
      }
    }
  }
}

Add to .vscode/mcp.json

{
  "servers": {
    "carmaker-mcp": {
      "type": "stdio",
      "command": "uvx",
      "args": [
        "carmaker-mcp"
      ],
      "env": {
        "CM_PROJECT": "<CM_PROJECT>"
      }
    }
  }
}

Add to ~/.codeium/windsurf/mcp_config.json

{
  "mcpServers": {
    "carmaker-mcp": {
      "command": "uvx",
      "args": [
        "carmaker-mcp"
      ],
      "env": {
        "CM_PROJECT": "<CM_PROJECT>"
      }
    }
  }
}

Add to your client's MCP settings (most use this shape)

{
  "mcpServers": {
    "carmaker-mcp": {
      "command": "uvx",
      "args": [
        "carmaker-mcp"
      ],
      "env": {
        "CM_PROJECT": "<CM_PROJECT>"
      }
    }
  }
}

Using several servers? Build one config file with the MCP config generator.

Configuration

  • CM_PROJECTCarMaker project folder. All writes are confined to it.Required
  • CM_MODELSimulink model that cm_session_start opens (name on the MATLAB path, or a file).
  • CM_MATLAB_SESSIONName under which MATLAB shares its engine.
  • CM_POPUP_TIMEOUTSeconds after which CarMaker GUI pop-ups answer themselves with their default choice. Not set: they wait for a click.
  • CM_ENABLEOptional tools, comma separated: tcl (raw Tcl in the GUI), experimental (Simulink structure edits).
  • CM_DISABLETool groups to switch off, comma separated: standalone, study, matlab.

Tools this server provides (2)

Taken from the project documentation; the running server may differ.

cm_session_start
Starts a CarMaker session and opens the configured Simulink model.
cm_guide
Teaches the agent how IPGDriver works.

What it does

Test runs and studies
Runs single tests and sequential background sweeps.
Parameter editing
Changes vehicle, driver and controller parameters, with undo.
Result reading
Reads and plots results and explains aborted runs.
Two run modes
Works with Simulink-connected sessions or standalone CarMaker.
Driver guide
A guide tool explains IPGDriver tuning.
Write confinement
Edits stay inside the configured project folder.

Good for

  • Sweep driver limits to find the best lap time
  • Compare yaw rate after changing a controller gain
  • Tabulate lateral acceleration for different vehicle masses
  • Diagnose why a run aborted
  • Revert parameter changes after an experiment

Pricing

Open source

Open source; needs your own CarMaker and MATLAB licences

CarMaker FAQ

What do I need installed?

CarMaker plus, for Simulink vehicles, MATLAB; you supply the licences.

Is it official?

No. It is an unofficial project not affiliated with IPG Automotive or MathWorks.

How mature is it?

Alpha, tested on one setup.

Can it write anywhere?

No. Writes are limited to the CM_PROJECT folder.

Is CarMaker free?

Yes. CarMaker is open source, so you can use and self-host it for free.

How do I add CarMaker to Claude Code?

Run this command in your terminal: claude mcp add carmaker-mcp --env CM_PROJECT='<CM_PROJECT>' -- uvx carmaker-mcp

What are the best alternatives to CarMaker?

The closest alternatives to CarMaker are CAD2GIS, Petrolytx: decline curves and well economics, zumen-gate, Gradient Dynamics: thermal and CFD simulation and The Cable Code.

Where this comes from

  • Description: written from the project's README.
  • Install steps: from the official MCP Registry entry.

How AIPoweredBot checks servers