Skip to content
MCP server

ESP32 Control

MCP server letting AI agents read and control ESP32 microcontroller devices

Pricing
Freemium
Platforms
CLI, self-hosted, API
Version
0.1.0
Listing updated
today

Similar MCP servers

About ESP32 Control

ESP32 Control is a freemium MCP server for smart home. It is available on CLI, self-hosted and API.

The README says this server lets an AI agent query and drive an ESP32 board over its network, covering device status, digital GPIO output and input, analog ADC readings in millivolts, raw application commands, and reboot. It sits between an MCP client and a small MicroPython firmware that the board runs, which exposes a REST API on port 80.

Setup involves flashing the firmware file to the ESP32, then running the Python server either over stdio for a local client such as Claude Desktop or Cursor, or over HTTP for remote agents. By default the board opens its own WiFi access point, and the firmware can alternatively join an existing network.

It suits hobbyists and makers who want to test sensors or switch outputs by asking an assistant in plain language. The README limits default GPIO output to a fixed set of pins and advises changing the access point password before exposing the device to the internet.

Tools this server provides (6)

Taken from the project documentation; the running server may differ.

esp32.status
Reports online state, chip, free heap and uptime.
esp32.gpio_set
Sets a GPIO pin high or low.
esp32.gpio_read
Reads a digital pin.
esp32.adc_read
Reads analog voltage in mV.
esp32.send_command
Sends a raw AT or application command.
esp32.reboot
Reboots the device.

What it does

Device status reporting
Returns whether the board is online, its chip details, free heap and uptime.
Digital GPIO control
Sets output pins high or low and reads digital input pins.
Analog voltage reading
Reads ADC pins and reports the voltage in millivolts.
Raw command passthrough
Sends arbitrary application commands to the device.
Remote HTTP transport
Runs the server over HTTP so agents on other machines can reach it.
Configurable output pin whitelist
Restricts which GPIO pins can be driven by default, editable in the firmware.

Good for

  • Switching a relay or LED on an ESP32 from a chat assistant
  • Checking sensor voltages on analog pins during prototyping
  • Monitoring a board's heap and uptime remotely
  • Rebooting a stuck microcontroller without physical access

Pricing

Freemium, from $9 a month

Free plan for one device; Pro from $9/mo or $90/yr

ESP32 Control FAQ

What hardware and firmware does it need?

The README says the ESP32 must run MicroPython and the provided main.py firmware, which serves a REST API on port 80.

How is it connected to the device by default?

By default the ESP32 opens a WiFi access point named ESP32-MCP, and the server points at http://192.168.4.1. The firmware can also be set to join an existing network.

Is it free to use?

The README lists a free plan with all six core tools for a single device. A Pro plan at $9/month or $90/year adds multi-device support, history, batch control, OTA updates and webhooks.

Which AI clients does it work with?

The README names Claude Desktop and Cursor, and says any MCP client can connect.

Is ESP32 Control free?

ESP32 Control has a free plan, with paid plans for more usage or features. Paid plans start at $9 a month.

What are the best alternatives to ESP32 Control?

The closest alternatives to ESP32 Control are Ctrlpi MCP, Heiman Smart Home and PlaiiinLight lamps.

Where this comes from

  • Description: written from the project's README and its MCP Registry entry.

How AIPoweredBot checks servers