Skip to content

Jetson customize mgbe vs Jetson customize pcie

Jetson customize mgbe is an open-source agent skill for developer tools. Jetson customize pcie is an open-source agent skill for developer tools.

  • Jetson customize mgbe is best for enable a 25g qsfp port on a jetson thor custom carrier board.
  • Jetson customize pcie is best for enable a pcie m.2 slot on a custom jetson orin carrier board.
What it is
Jetson customize mgbe is an open-source agent skill for developer tools.
Jetson customize pcie is an open-source agent skill for developer tools.
Best for
Enable a 25G QSFP port on a Jetson Thor custom carrier board
Enable a PCIe M.2 slot on a custom Jetson Orin carrier board
Kind
Skill
Skill
Pricing
Open source
Open source
Platforms
Claude Code, Codex, Cursor, Gemini CLI, GitHub Copilot, Windsurf, Goose
Claude Code, Codex, Cursor, Gemini CLI, GitHub Copilot, Windsurf, Goose
GitHub stars
4K
4K
Last commit
Nov 2026
Nov 2026
License
Apache-2.0
Apache-2.0
Open source
Good for
Enable a 25G QSFP port on a Jetson Thor custom carrier board; Bring up a 10G fiber path on an MGBE controller; Diagnose an MGBE interface stuck in NO-CARRIER after boot
Enable a PCIe M.2 slot on a custom Jetson Orin carrier board; Change the lane count of a PCIe controller on a Jetson Thor carrier; Disable an unused PCIe controller in the kernel device tree

What Jetson customize mgbe does

  • Kernel overlay generation

    Writes device-tree fragments that enable an MGBE controller and attach its PHY for a QSFP cage.

  • Per-controller question flow

    Collects PHY mode, attach kind, MDIO bus address and reset GPIO for each controller.

  • Speed derivation from BPMP

    Inspects the BPMP device tree to choose the correct speed token form before emitting it.

  • HSIO pin verification

    Runs a shared verifier on MDC, MDIO, reset and interrupt pins and flags mismatches.

  • Overlay commit and sidecar

    Appends fragments to the composite overlay and records run state in a JSON sidecar.

  • Sibling skill handoff

    Directs UPHY lane allocation and pinmux fixes to their owning skills in a fixed order.

What Jetson customize pcie does

  • Per-controller enable and disable

    Turns individual PCIe controllers on or off through kernel device-tree overlay fragments.

  • Lane width and link speed

    Sets num-lanes and link speed for each controller based on the adaptation guide.

  • Topology diff against devkit

    Compares the reference devkit PCIe layout with the custom carrier schematic.

  • HSIO pin verification

    Checks CLKREQ, RST and WAKE pin assignments with a bundled pin verifier script.

  • ODMDATA consistency check

    Cross-checks the overlay against bootloader settings and reports contradictions rather than fixing them silently.

  • Overlay fragment generation

    Appends marked fragment blocks to the composite custom overlay and runs dtc and fdtoverlay pre-flight checks.

Jetson customize mgbe vs Jetson customize pcie: questions

Is Jetson customize mgbe or Jetson customize pcie cheaper?

Both are open source. Compare current plans on each official site.

What is the difference between Jetson customize mgbe and Jetson customize pcie?

Jetson customize mgbe is an open-source agent skill for developer tools. Jetson customize pcie is an open-source agent skill for developer tools.

Keep comparing