# The Grate Guys Tools

> The Grate Guys Tools is an MCP server for manufacturing. Remote MCP server with planning calculators for metal grating and drainage covers. It runs as a hosted remote server, so there is nothing to install locally.

- **Kind:** MCP server
- **Platforms:** API
- **MCP Registry name:** com.thegrateguys/tools
- **Categories:** [manufacturing](https://ai-powered.com/categories/manufacturing)
- **Listing updated:** 2026-11-18

## About

This server is hosted by The Grate Guys and reached over streamable HTTP at thegrateguys.com/mcp, so there is nothing to install locally. An MCP-capable client connects to the remote URL and gains access to the vendor's planning calculators.

The registry entry describes the calculators as covering metal grating, drainage covers and fabrication. It is aimed at people who specify, quote or plan these products and want an AI assistant to help with the calculations.

The registry entry does not list individual tool names, so the exact calculators available are best checked by connecting a client and listing the tools.

## Features

- **Grating planning calculators:** Provides calculators for planning metal grating projects.
- **Drainage cover support:** Includes planning help for drainage covers.
- **Fabrication calculators:** Covers fabrication-related planning calculations.
- **Remote streamable HTTP:** Runs as a hosted endpoint, so no local package is required.

## Good for

- Estimate requirements for a metal grating job while chatting with an AI assistant
- Plan drainage cover selection for a site
- Support fabrication planning for grating products
- Add industrial grating calculators to an MCP-enabled workflow

## Install

### Claude Code (Terminal)

```sh
claude mcp add --transport http tools https://thegrateguys.com/mcp
```

### Claude Desktop (Settings → Connectors → Add custom connector)

```sh
https://thegrateguys.com/mcp
```

### Cursor (~/.cursor/mcp.json)

```json
{
  "mcpServers": {
    "tools": {
      "url": "https://thegrateguys.com/mcp"
    }
  }
}
```

### VS Code (.vscode/mcp.json)

```json
{
  "servers": {
    "tools": {
      "type": "http",
      "url": "https://thegrateguys.com/mcp"
    }
  }
}
```

### Windsurf (~/.codeium/windsurf/mcp_config.json)

```json
{
  "mcpServers": {
    "tools": {
      "serverUrl": "https://thegrateguys.com/mcp"
    }
  }
}
```

### Grok Bot (Grok Bot desktop app → Connect apps → Add a custom connector)

```sh
https://thegrateguys.com/mcp
```

Enter a Name (for example "The Grate Guys Tools"), choose Type: Remote HTTPS, paste this as the Server URL and choose Add plugin.

### Other clients (your client's MCP settings (most use this shape))

```json
{
  "mcpServers": {
    "tools": {
      "type": "http",
      "url": "https://thegrateguys.com/mcp"
    }
  }
}
```

## Tools

All 15 tools say they're read-only. From the server's own tool annotations; not verified by us.

- `bar_grating_load_calculator` (says read-only): Finds the lightest welded steel bearing bar (19-W-4 or 15-W-4, smooth or serrated) that carries a clear span and load within a deflection limit.
- `bar_grating_load_tables` (says read-only): Looks up the safe uniform load (U), safe concentrated load (C), deflections and weight for welded steel bar grating by bearing bar size and span.
- `aluminum_stainless_bar_grating_load_calculator` (says read-only): Safe load, deflection and the lightest bearing bar for aluminum 6063-T6 and stainless 304, 316, 304L and 316L bar grating at 1-3/16 in bar centres.
- `accessible_grating_opening_checker` (says read-only): Checks the clear opening between bearing bars against the Ontario Building Code 13 mm limit for barrier-free paths of travel, and the widest bar spacing that would pass.
- `galvanizing_coating_thickness_calculator` (says read-only): Minimum average hot-dip galvanized coating grade by steel category and thickness, in mils, microns and ounces of zinc per square foot, with total zinc for a surface area.
- `guard_and_railing_code_checker_ontario` (says read-only): Whether a guard is required, its minimum height, opening limit, climbing rule and design loads under the Ontario Building Code Part 9 and Part 3 for a described situation.
- `steel_stair_calculator_ontario` (says read-only): Allowed riser counts, riser height, tread run, flights, width, headroom and handrail height for a total rise under Ontario Building Code Part 9.
- `steel_weight_calculator` (says read-only): Theoretical weight of carbon steel plate, flat bar, round bar, square bar, angle, square or rectangular tube and round pipe, in pounds and kilograms.
- `trench_drain_grate_load_class` (says read-only): The EN 1433 load class, A 15 to F 900, and its test load in kN for where a trench drain goes and what drives or rolls over it.
- `bollard_spacing_and_footing_calculator` (says read-only): Counts the bollards for a frontage and clear gap, checks the gap against vehicle and wheelchair guidance, gives typical footing and concrete for a standard (not crash rated) steel pipe bollard, and explains crash ratings.
- `steel_beam_lintel_span_check` (says read-only): The steel angle lintel or steel beam that the 2024 Ontario Building Code Part 9 tables list for an opening width in a brick or stone veneer wall or a masonry wall, with the 150 mm bearing rule. Not a stamped design.
- `catch_basin_grate_and_frame_size_finder` (says read-only): Names the Ontario Provincial Standard Drawing for a catch basin inlet type, checks the grate bearing on the frame ledge against the NAAMM minimum, gives the range of bearing bar lengths that sit on the ledge, and lists the EN 1433 load class for the traffic.
- `fence_and_gate_post_spacing_and_weight` (says read-only): Post count and spacing for a chain link or ornamental steel fence run, chain link footing depth and gate post size, and the weight and hinge loads of an ornamental steel gate leaf.
- `trench_drain_flow_capacity_calculator` (says read-only): The flow a trench drain has to handle from a paved area (rational method with Toronto City rainfall rates from Environment and Climate Change Canada) and the flow the channel carries (Manning), with the narrowest channel that works.
- `loading_dock_height_and_leveler_check` (says read-only): The grade a dock leveler works at between the lowest and highest truck bed you serve, against the 10% (electric) and 15% (gas or diesel) limits, the shortest standard leveler length that fits, and whether two makers published working ranges cover it.

## FAQ

### How do I connect to this server?

Point an MCP client that supports streamable HTTP at https://thegrateguys.com/mcp.

### Do I need to install anything?

No. The registry lists no packages, only a remote streamable HTTP endpoint.

### What does it calculate?

It offers planning calculators for metal grating, drainage covers and fabrication.

### How do I add The Grate Guys Tools to Claude Code?

Run this command in your terminal: claude mcp add --transport http tools https://thegrateguys.com/mcp

### What are the best alternatives to The Grate Guys Tools?

The closest alternatives to The Grate Guys Tools are Team Solutions Mexico, Alianza Team, Future Micro Mold Lab, Printlooper and shikake101.co.jp.

## Where this comes from

- Description: written from its MCP Registry entry.
- Status and tools: checked automatically by AIPoweredBot on 19 November 2026.
- Install steps: from the official MCP Registry entry.

## Alternatives

- [Team Solutions Mexico](https://ai-powered.com/mcp/team-solutions-mexico): Team Solutions Mexico is an MCP server for manufacturing.
- [Alianza Team](https://ai-powered.com/mcp/alianza-team): Alianza Team is an MCP server for manufacturing.
- [Future Micro Mold Lab](https://ai-powered.com/mcp/future-micro-mold-lab): Future Micro Mold Lab is an MCP server for manufacturing.
- [Printlooper](https://ai-powered.com/mcp/printlooper): Printlooper is a freemium MCP server for manufacturing.
- [shikake101.co.jp](https://ai-powered.com/mcp/shikake101-co-jp): shikake101.co.jp is a free MCP server for manufacturing.
- [Cutlab CNC](https://ai-powered.com/mcp/cutlab-cnc): Cutlab CNC is a paid MCP server for manufacturing.
- [ProofPass](https://ai-powered.com/mcp/proofpass): ProofPass is a freemium MCP server for legal and government.
- [轻排生产排产（MRP-PMC）](https://ai-powered.com/mcp/mrp-pmc): 轻排生产排产（MRP-PMC） is a freemium MCP server for manufacturing.

---
Source: https://ai-powered.com/mcp/the-grate-guys-tools
