# Emission Factors

> Emission Factors is a free MCP server for energy and smart home. Keyless US grid carbon intensity and electricity rates by ZIP code. It runs as a hosted remote server, so there is nothing to install locally.

- **Kind:** MCP server
- **Pricing:** Free
- **Platforms:** API, CLI
- **Website:** https://emission-factors.com/mcp-setup
- **Repository:** https://github.com/rozetyp/emission-factors-mcp
- **MCP Registry name:** io.github.rozetyp/emission-factors
- **Categories:** energy and smart home, analytics and data
- **Listing updated:** 2026-11-15

## About

Emission Factors wraps several US government energy datasets into one ZIP-keyed server: EPA eGRID, EIA-861 and EIA-930, EPA Clean Air Markets and OpenEI utility rates. The README says it covers more than 33,700 ZIP codes and needs no key or signup, with a limit of 2,000 requests an hour per IP.

For carbon accounting, calculate_emissions turns a ZIP and a kWh total into Scope 2 CO2e using both GHG Protocol methods: the location-based eGRID subregion rate and a market-based figure from the Green-e residual mix. Other tools return a subregion's generation mix and pollutants, a batch of up to 100 ZIPs, hourly carbon intensity from EIA-930 fuel-mix data, plant-level CAMD emissions for fossil units above 25 MW, and the actual utility tariff rather than a state average.

Its hourly figures are meant for timing and load shifting, not inventory reporting, and they lag by up to about a day. A remote server is hosted, and a local stdio build is available for clients that cannot use remote servers.

## Features

- **Scope 2 calculator:** Computes location-based and market-based CO2e from ZIP and kWh.
- **ZIP lookups:** Emission factors, generation mix and carbon-free share by ZIP.
- **Batch lookup:** Up to 100 ZIP codes in a single call.
- **Hourly intensity:** Hourly grid carbon from EIA-930 fuel-mix data.
- **Plant emissions:** EPA CAMD data for fossil units over 25 MW.
- **Utility tariffs:** Actual utility rates, fixed charge and time-of-use flag.

## Good for

- Estimate a facility's Scope 2 footprint from its ZIP and annual kWh
- Compare candidate data center sites on carbon and power cost
- Find the cleanest hours to run a batch job
- Enrich a list of store ZIPs with emission factors
- Look up the dirtiest power plants in a state

## Install

### Claude Code (Terminal)

```sh
claude mcp add --transport http emission-factors https://emission-factors.com/mcp
```

### Claude Desktop (Settings → Connectors → Add custom connector)

```sh
https://emission-factors.com/mcp
```

### Cursor (~/.cursor/mcp.json)

```json
{
  "mcpServers": {
    "emission-factors": {
      "url": "https://emission-factors.com/mcp"
    }
  }
}
```

### VS Code (.vscode/mcp.json)

```json
{
  "servers": {
    "emission-factors": {
      "type": "http",
      "url": "https://emission-factors.com/mcp"
    }
  }
}
```

### Windsurf (~/.codeium/windsurf/mcp_config.json)

```json
{
  "mcpServers": {
    "emission-factors": {
      "serverUrl": "https://emission-factors.com/mcp"
    }
  }
}
```

### Other clients (your client's MCP settings (most use this shape))

```json
{
  "mcpServers": {
    "emission-factors": {
      "type": "http",
      "url": "https://emission-factors.com/mcp"
    }
  }
}
```

## Tools

- `lookup_emission_factor`: eGRID emission factors and generation mix for a US ZIP code
- `lookup_by_coordinates`: Emission factors from latitude and longitude
- `lookup_batch`: Emission factors for up to 100 ZIP codes
- `calculate_emissions`: Scope 2 CO2e from ZIP and kWh by both methods
- `hourly_intensity`: Hourly grid carbon intensity for a ZIP
- `plant_emissions`: EPA CAMD emissions for a plant or state
- `utility_tariff`: Utility-specific electricity rate for a ZIP or utility

## FAQ

### Do I need an API key?

No. It is keyless, with a limit of 2,000 requests an hour per IP.

### Which methods does Scope 2 use?

Both GHG Protocol methods: location-based eGRID and market-based Green-e residual mix.

### Is the hourly data real-time?

No. It lags up to about a day and is meant for timing analysis, not inventory reporting.

### Does it work in Claude Desktop?

Use the connector link or the local stdio build, since the config file only starts local servers.

### Is Emission Factors free?

Yes. Emission Factors is free to use.

### How do I add Emission Factors to Claude Code?

Run this command in your terminal: claude mcp add --transport http emission-factors https://emission-factors.com/mcp

### What are the best alternatives to Emission Factors?

The closest alternatives to Emission Factors are Agent-Native Analytics, Google Ads + Meta Ads + SEO/GEO MCP, Tapetide - Indian Stock Market MCP, World Monitor and CompanyData.

## Alternatives

- [Agent-Native Analytics](https://ai-powered.com/mcp/agent-native-analytics): Agent-Native Analytics is an open-source MCP server for analytics and data.
- [Google Ads + Meta Ads + SEO/GEO MCP](https://ai-powered.com/mcp/google-ads-meta-ads-seo-geo-mcp): Google Ads + Meta Ads + SEO/GEO MCP is a freemium MCP server for marketing and seo.
- [Tapetide - Indian Stock Market MCP](https://ai-powered.com/mcp/tapetide-indian-stock-market-mcp): Tapetide - Indian Stock Market MCP is a freemium MCP server for finance and payments.
- [World Monitor](https://ai-powered.com/mcp/world-monitor): World Monitor is a freemium MCP server for analytics and data.
- [CompanyData](https://ai-powered.com/mcp/companydata): CompanyData is a paid MCP server for analytics and data.
- [ChartAnt](https://ai-powered.com/mcp/chartant): ChartAnt is a freemium MCP server for design and media.
- [Quantivex Research](https://ai-powered.com/mcp/quantivex-research): Quantivex Research is a free MCP server for finance and payments.
- [Provyan](https://ai-powered.com/mcp/provyan): Provyan is a free MCP server for finance and payments.

---
Source: https://ai-powered.com/mcp/emission-factors
