# CarMaker

> CarMaker is an open-source MCP server for engineering simulation. Let an agent run IPG CarMaker tests and parameter sweeps and read the results. It runs locally on your machine and is started by your AI client.

- **Kind:** MCP server
- **Pricing:** Open source
- **Platforms:** Windows, CLI, self-hosted
- **Repository:** https://github.com/de-ioannidis/carmaker-mcp
- **MCP Registry name:** io.github.De-Ioannidis/carmaker-mcp
- **Categories:** [engineering simulation](https://ai-powered.com/categories/engineering-simulation)
- **Listing updated:** 2026-11-18

## About

This community server lets an agent drive IPG CarMaker on your own computer. It can start a session, run test runs and background parameter studies one after another, read and plot results, change vehicle, driver and Simulink controller parameters, and undo what it changed. The README demo has an agent sweep the driver's lateral acceleration limits on a Formula Student skid pad over 68 runs.

It works in two modes. A MATLAB-connected session suits vehicles with a Simulink controller and needs MATLAB, your model and the CarMaker GUI. A standalone run uses CarMaker's built-in controllers and needs only CarMaker. A guide tool teaches the agent how IPGDriver's limits and g-g exponents affect lap time.

The project is alpha, tested on CarMaker 14.1.1, MATLAB R2024b and Windows 11, and is unofficial. You need your own licences. Writes are confined to the project folder named in CM_PROJECT. Linux, TruckMaker, HIL, Test Manager and road or traffic building are not covered.

## Features

- **Test runs and studies:** Runs single tests and sequential background sweeps.
- **Parameter editing:** Changes vehicle, driver and controller parameters, with undo.
- **Result reading:** Reads and plots results and explains aborted runs.
- **Two run modes:** Works with Simulink-connected sessions or standalone CarMaker.
- **Driver guide:** A guide tool explains IPGDriver tuning.
- **Write confinement:** Edits stay inside the configured project folder.

## Good for

- Sweep driver limits to find the best lap time
- Compare yaw rate after changing a controller gain
- Tabulate lateral acceleration for different vehicle masses
- Diagnose why a run aborted
- Revert parameter changes after an experiment

## Install

### Claude Code (Terminal)

```sh
claude mcp add carmaker-mcp --env CM_PROJECT='<CM_PROJECT>' -- uvx carmaker-mcp
```

### Claude Desktop (claude_desktop_config.json)

```json
{
  "mcpServers": {
    "carmaker-mcp": {
      "command": "uvx",
      "args": [
        "carmaker-mcp"
      ],
      "env": {
        "CM_PROJECT": "<CM_PROJECT>"
      }
    }
  }
}
```

### Cursor (~/.cursor/mcp.json)

```json
{
  "mcpServers": {
    "carmaker-mcp": {
      "command": "uvx",
      "args": [
        "carmaker-mcp"
      ],
      "env": {
        "CM_PROJECT": "<CM_PROJECT>"
      }
    }
  }
}
```

### VS Code (.vscode/mcp.json)

```json
{
  "servers": {
    "carmaker-mcp": {
      "type": "stdio",
      "command": "uvx",
      "args": [
        "carmaker-mcp"
      ],
      "env": {
        "CM_PROJECT": "<CM_PROJECT>"
      }
    }
  }
}
```

### Windsurf (~/.codeium/windsurf/mcp_config.json)

```json
{
  "mcpServers": {
    "carmaker-mcp": {
      "command": "uvx",
      "args": [
        "carmaker-mcp"
      ],
      "env": {
        "CM_PROJECT": "<CM_PROJECT>"
      }
    }
  }
}
```

### Other clients (your client's MCP settings (most use this shape))

```json
{
  "mcpServers": {
    "carmaker-mcp": {
      "command": "uvx",
      "args": [
        "carmaker-mcp"
      ],
      "env": {
        "CM_PROJECT": "<CM_PROJECT>"
      }
    }
  }
}
```

## Tools

- `cm_session_start`: Starts a CarMaker session and opens the configured Simulink model.
- `cm_guide`: Teaches the agent how IPGDriver works.

## FAQ

### What do I need installed?

CarMaker plus, for Simulink vehicles, MATLAB; you supply the licences.

### Is it official?

No. It is an unofficial project not affiliated with IPG Automotive or MathWorks.

### How mature is it?

Alpha, tested on one setup.

### Can it write anywhere?

No. Writes are limited to the CM_PROJECT folder.

### Is CarMaker free?

Yes. CarMaker is open source, so you can use and self-host it for free.

### How do I add CarMaker to Claude Code?

Run this command in your terminal: claude mcp add carmaker-mcp --env CM_PROJECT='<CM_PROJECT>' -- uvx carmaker-mcp

### What are the best alternatives to CarMaker?

The closest alternatives to CarMaker are CAD2GIS, Petrolytx: decline curves and well economics, zumen-gate, Gradient Dynamics: thermal and CFD simulation and The Cable Code.

## Where this comes from

- Description: written from the project's README.
- Install steps: from the official MCP Registry entry.

## Alternatives

- [CAD2GIS](https://ai-powered.com/mcp/cad2gis): CAD2GIS is an open-source MCP server for engineering simulation.
- [Petrolytx: decline curves and well economics](https://ai-powered.com/mcp/petrolytx-decline-curves-and-well-economics): Petrolytx: decline curves and well economics is a freemium MCP server for analytics and data.
- [zumen-gate](https://ai-powered.com/mcp/zumen-gate): zumen-gate is a freemium MCP server for engineering simulation.
- [Gradient Dynamics: thermal and CFD simulation](https://ai-powered.com/mcp/gradient-dynamics-thermal-and-cfd-simulation): Gradient Dynamics: thermal and CFD simulation is an MCP server for engineering simulation.
- [The Cable Code](https://ai-powered.com/mcp/the-cable-code): The Cable Code is a freemium MCP server for engineering simulation.
- [naja-scope](https://ai-powered.com/mcp/naja-scope): naja-scope is an open-source MCP server for developer tools.
- [StructaCAD](https://ai-powered.com/mcp/structacad): StructaCAD is a paid MCP server for engineering simulation.
- [VextCAD](https://ai-powered.com/mcp/vextcad): VextCAD is a freemium MCP server for design and media.

---
Source: https://ai-powered.com/mcp/carmaker
